Не знаю может проблема и не в FLProg, а в IDE arduino.
Пытаюсь залить проект в Arduino pro mini (5В, 328, 16МГц) в версии 1.14, не заливает в IDE arduino (v1.6.3) пишет:
Arduino: 1.6.3 (Windows 7), Плата"Arduino Pro or Pro Mini, ATmega328 (5V, 16 MHz)"
Sketch uses 846 bytes (2%) of program storage space. Maximum is 30 720 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2 039 bytes for local variables. Maximum is 2 048 bytes.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x5f
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x5f
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x5f
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x5f
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x5f
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x5f
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x5f
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x5f
avrdude: stk500_recv(): programmer is not responding
Проблема загрузки на плату. Для достижения дзен, курить http://www.arduino.cc/en/Guide/Troubleshooting#upload .
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x5f
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x5f
Скачал версию FLProg 1.9.2 (IDE arduino в ней v1.6.3), заливаю проект, полёт нормальный, залил.
Программирую через переходник: http://ru.aliexpress.com/item....97e375f
Может кто сталкивался?
