Ошибка компиляции ESP8266 в среде IDE в портативной версии 8.0.0, пробывал 7.4.6 -тоже то самое.
Если ставишь установочную, то работает. Вот ниже лог, помогите пожалуста.
Arduino: 1.8.19 (Windows 7), Плата:"NodeMCU 0.9 (ESP-12 Module), 80 MHz, Flash, Disabled (new aborts on oom), Disabled, All SSL ciphers (most compatible), 32KB cache + 32KB IRAM (balanced), Use pgm_read macros for IRAM/PROGMEM, 4MB (FS:none OTA:~1019KB), v2 Lower Memory, Disabled, None, Only Sketch, 115200"
d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\arduino-builder -dump-prefs -logger=machine -hardware d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\hardware -hardware d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\portable\packages -hardware d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\portable\sketchbook\hardware -tools d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\tools-builder -tools d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\hardware\tools\avr -tools d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\portable\packages -built-in-libraries d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\libraries -libraries d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\portable\sketchbook\libraries -fqbn=esp8266:esp8266:nodemcu:xtal=80,vt=flash,exception=disabled,stacksmash=disabled,ssl=all,mmu=3232,non32xfer=fast,eesz=4M,ip=lm2f,dbg=Disabled,lvl=None____,wipe=none,baud=115200 -ide-version=10819 -build-path C:\Users\A4F7~1\AppData\Local\Temp\arduino_build_111597 -warnings=all -build-cache C:\Users\A4F7~1\AppData\Local\Temp\arduino_cache_850342 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.mklittlefs.path=d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\portable\packages\esp8266\tools\mklittlefs\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.mklittlefs-3.0.4-gcc10.3-1757bed.path=d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\portable\packages\esp8266\tools\mklittlefs\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.mkspiffs.path=d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\portable\packages\esp8266\tools\mkspiffs\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.mkspiffs-3.0.4-gcc10.3-1757bed.path=d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\portable\packages\esp8266\tools\mkspiffs\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.python3.path=d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\portable\packages\esp8266\tools\python3\3.7.2-post1 -prefs=runtime.tools.python3-3.7.2-post1.path=d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\portable\packages\esp8266\tools\python3\3.7.2-post1 -prefs=runtime.tools.xtensa-lx106-elf-gcc.path=d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\portable\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.xtensa-lx106-elf-gcc-3.0.4-gcc10.3-1757bed.path=d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\portable\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.0.4-gcc10.3-1757bed -verbose C:\Users\Андрей\AppData\Local\Temp\flprog\pr1\pr1.ino
d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\arduino-builder -compile -logger=machine -hardware d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\hardware -hardware d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\portable\packages -hardware d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\portable\sketchbook\hardware -tools d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\tools-builder -tools d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\hardware\tools\avr -tools d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\portable\packages -built-in-libraries d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\libraries -libraries d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\portable\sketchbook\libraries -fqbn=esp8266:esp8266:nodemcu:xtal=80,vt=flash,exception=disabled,stacksmash=disabled,ssl=all,mmu=3232,non32xfer=fast,eesz=4M,ip=lm2f,dbg=Disabled,lvl=None____,wipe=none,baud=115200 -ide-version=10819 -build-path C:\Users\A4F7~1\AppData\Local\Temp\arduino_build_111597 -warnings=all -build-cache C:\Users\A4F7~1\AppData\Local\Temp\arduino_cache_850342 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.mklittlefs.path=d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\portable\packages\esp8266\tools\mklittlefs\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.mklittlefs-3.0.4-gcc10.3-1757bed.path=d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\portable\packages\esp8266\tools\mklittlefs\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.mkspiffs.path=d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\portable\packages\esp8266\tools\mkspiffs\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.mkspiffs-3.0.4-gcc10.3-1757bed.path=d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\portable\packages\esp8266\tools\mkspiffs\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.python3.path=d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\portable\packages\esp8266\tools\python3\3.7.2-post1 -prefs=runtime.tools.python3-3.7.2-post1.path=d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\portable\packages\esp8266\tools\python3\3.7.2-post1 -prefs=runtime.tools.xtensa-lx106-elf-gcc.path=d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\portable\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.xtensa-lx106-elf-gcc-3.0.4-gcc10.3-1757bed.path=d:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\portable\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.0.4-gcc10.3-1757bed -verbose C:\Users\Андрей\AppData\Local\Temp\flprog\pr1\pr1.ino
Using board 'nodemcu' from platform in folder: D:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\portable\packages\esp8266\hardware\esp8266\3.0.2
Using core 'esp8266' from platform in folder: D:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\portable\packages\esp8266\hardware\esp8266\3.0.2
Detecting libraries used...
"d:\\Electronics automatics\\Arduino\\FLProg\\PortableFLProg_8-0-0_Win32\\ideV8\\portable\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-ID:\\Electronics automatics\\Arduino\\FLProg\\PortableFLProg_8-0-0_Win32\\ideV8\\portable\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-ID:\\Electronics automatics\\Arduino\\FLProg\\PortableFLProg_8-0-0_Win32\\ideV8\\portable\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-ID:\\Electronics automatics\\Arduino\\FLProg\\PortableFLProg_8-0-0_Win32\\ideV8\\portable\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\A4F7~1\\AppData\\Local\\Temp\\arduino_build_111597/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10819 -DARDUINO_ESP8266_NODEMCU_ESP12 -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_NODEMCU_ESP12\"" -DFLASHMODE_QIO -DESP8266 "-ID:\\Electronics automatics\\Arduino\\FLProg\\PortableFLProg_8-0-0_Win32\\ideV8\\portable\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-ID:\\Electronics automatics\\Arduino\\FLProg\\PortableFLProg_8-0-0_Win32\\ideV8\\portable\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\nodemcu" "C:\\Users\\A4F7~1\\AppData\\Local\\Temp\\arduino_build_111597\\sketch\\pr1.ino.cpp" -o nul
Alternatives for bits/c++config.h: []
ResolveLibrary(bits/c++config.h)
-> candidates: []
In file included from d:\electronics automatics\arduino\flprog\portableflprog_8-0-0_win32\idev8\portable\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.0.4-gcc10.3-1757bed\xtensa-lx106-elf\include\c++\10.3.0\stdlib.h:36,
from D:\Electronics automatics\Arduino\FLProg\PortableFLProg_8-0-0_Win32\ideV8\portable\packages\esp8266\hardware\esp8266\3.0.2\cores\esp8266/Arduino.h:27,
from C:\Users\A4F7~1\AppData\Local\Temp\arduino_build_111597\sketch\pr1.ino.cpp:1:
d:\electronics automatics\arduino\flprog\portableflprog_8-0-0_win32\idev8\portable\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.0.4-gcc10.3-1757bed\xtensa-lx106-elf\include\c++\10.3.0\cstdlib:41:10: fatal error: bits/c++config.h: No such file or directory
41 | #include <bits/c++config.h>
| ^~~~~~~~~~~~~~~~~~
compilation terminated.
exit status 1
Ошибка компиляции для платы NodeMCU 0.9 (ESP-12 Module).
