narodmon.ru ошибка компиляции

kivik · #1

Всем привет.
Плата ардуино UNO и шилд W5100.
Использую готовый сервис narodmon.ru убрал все лишнее только один блок narodmon.ru запускаю компилировать проект отрывается IDE arduino далее загрузка и получаю ошибку

СпойлерПоказать

Arduino: 1.8.9 (Windows 8.1), Плата:"Arduino Duemilanove or Diecimila, ATmega328P"

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\EthernetClient.cpp: In member function 'virtual uint16_t EthernetClient::localPort()':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\EthernetClient.cpp:185:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\EthernetClient.cpp:24:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\EthernetClient.cpp:185:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\EthernetClient.cpp:187:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\EthernetClient.cpp: In member function 'virtual IPAddress EthernetClient::remoteIP()':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\EthernetClient.cpp:197:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\EthernetClient.cpp:24:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\EthernetClient.cpp:197:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\EthernetClient.cpp:199:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\EthernetClient.cpp: In member function 'virtual uint16_t EthernetClient::remotePort()':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\EthernetClient.cpp:209:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\EthernetClient.cpp:24:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\EthernetClient.cpp:209:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\EthernetClient.cpp:211:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

Несколько библиотек найдено для "Ethernet.h"
Используется: C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0
Не используется: C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-1.1.2
C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp: In static member function 'static uint8_t EthernetClass::socketBegin(uint8_t, uint16_t)':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:74:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:74:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:98:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:122:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp: In static member function 'static uint8_t EthernetClass::socketBeginMulticast(uint8_t, IPAddress, uint16_t)':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:138:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:138:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:162:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:194:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp: In static member function 'static uint8_t EthernetClass::socketStatus(uint8_t)':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:201:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:201:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:203:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp: In static member function 'static void EthernetClass::socketClose(uint8_t)':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:212:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:212:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:214:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp: In static member function 'static uint8_t EthernetClass::socketListen(uint8_t)':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:222:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:222:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:224:7: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:228:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp: In static member function 'static void EthernetClass::socketConnect(uint8_t, uint8_t*, uint16_t)':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:238:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:238:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:242:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp: In static member function 'static void EthernetClass::socketDisconnect(uint8_t)':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:251:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:251:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:253:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp: In static member function 'static int EthernetClass::socketRecv(uint8_t, uint8_t*, int16_t)':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:308:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:308:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:345:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp: In static member function 'static uint16_t EthernetClass::socketRecvAvailable(uint8_t)':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:354:7: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:354:24: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:356:7: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp: In static member function 'static uint8_t EthernetClass::socketPeek(uint8_t)':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:369:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:369:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:372:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp: In static member function 'static uint16_t EthernetClass::socketSend(uint8_t, const uint8_t*, uint16_t)':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:436:7: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:436:24: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:439:7: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:448:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:448:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:456:8: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:459:7: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:461:7: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:465:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp: In static member function 'static uint16_t EthernetClass::socketSendAvailable(uint8_t)':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:473:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:473:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:476:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp: In static member function 'static uint16_t EthernetClass::socketBufferData(uint8_t, uint16_t, const uint8_t*, uint16_t)':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:487:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:487:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:495:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp: In static member function 'static bool EthernetClass::socketStartUDP(uint8_t, uint8_t*, uint16_t)':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:505:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:505:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:508:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp: In static member function 'static bool EthernetClass::socketSendUDP(uint8_t)':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:514:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:514:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:522:8: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:526:7: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:528:7: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\socket.cpp:533:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

exit status 1
C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp: In static member function 'static int EthernetClass::begin(uint8_t*, long unsigned int, long unsigned int)':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:36:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:36:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:39:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:46:7: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:50:7: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp: In static member function 'static void EthernetClass::begin(uint8_t*, IPAddress, IPAddress, IPAddress, IPAddress)':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:84:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:84:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:95:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp: In static member function 'static int EthernetClass::maintain()':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:137:8: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:137:25: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:141:8: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp: In static member function 'static void EthernetClass::MACAddress(uint8_t*)':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:155:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:155:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:157:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp: In static member function 'static IPAddress EthernetClass::localIP()':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:163:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:163:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:165:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp: In static member function 'static IPAddress EthernetClass::subnetMask()':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:172:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:172:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:174:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp: In static member function 'static IPAddress EthernetClass::gatewayIP()':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:181:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:181:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:183:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp: In member function 'void EthernetClass::setMACAddress(const uint8_t*)':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:189:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:189:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:191:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp: In member function 'void EthernetClass::setLocalIP(IPAddress)':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:196:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:196:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:199:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp: In member function 'void EthernetClass::setSubnetMask(IPAddress)':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:204:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:204:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:207:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp: In member function 'void EthernetClass::setGatewayIP(IPAddress)':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:212:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:212:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:215:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp: In member function 'void EthernetClass::setRetransmissionTimeout(uint16_t)':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:221:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:221:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:223:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp: In member function 'void EthernetClass::setRetransmissionCount(uint8_t)':

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:228:6: error: 'class SPIClass' has no member named 'beginTransaction'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

In file included from C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:23:0:

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\utility/w5100.h:21:72: error: 'SPISettings' was not declared in this scope

#define SPI_ETHERNET_SETTINGS SPISettings(14000000, MSBFIRST, SPI_MODE0)

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:228:23: note: in expansion of macro 'SPI_ETHERNET_SETTINGS'

SPI.beginTransaction(SPI_ETHERNET_SETTINGS);

^

C:\Users\Kutkov\Documents\Arduino\libraries\Ethernet-2.0.0\src\Ethernet.cpp:230:6: error: 'class SPIClass' has no member named 'endTransaction'

SPI.endTransaction();

^

Ошибка компиляции для платы Arduino Duemilanove or Diecimila.

Этот отчёт будет иметь больше информации с
включенной опцией Файл -> Настройки ->
"Показать подробный вывод во время компиляции"

Я понял так что проблема в библиотеке Ethernet . Какую библиотеку нужно использовать с блоком narodmon.ru? Или что не так

Отправлено спустя 3 минуты 44 секунды:
Добавлю
FLProg версия 5.3.0
Arduino IDE версия 1.8.9

SergeyShikal · #2

kivik писал(а): ↑
28.10.2019{, 22:33}
Всем привет.
Плата ардуино UNO и шилд W5100.
Использую готовый сервис narodmon.ru убрал все лишнее только один блок narodmon.ru запускаю компилировать проект отрывается IDE arduino далее загрузка и получаю ошибку

Сам проект где?

kivik · #3

Всего один блок. Проблема не FLProg а скорее в arduino IDE. Пока не могу найти свою ошибку.

SergeyShikal · #4

kivik писал(а): ↑
29.10.2019{, 09:20}
Всего один блок. Проблема не FLProg а скорее в arduino IDE. Пока не могу найти свою ошибку.

Залилось без проблем, при загрузке рх тх отключаете?

kivik · #5

До загрузки дело не доходит ругается ошибка компиляции. Если не сложно прикрепите библиотеку Ethernet.h которую вы используете.

SergeyShikal · #6

kivik писал(а): ↑
29.10.2019{, 16:04}
До загрузки дело не доходит ругается ошибка компиляции. Если не сложно прикрепите библиотеку Ethernet.h которую вы используете.

Версия библиотеки 2.0

СпойлерПоказать

Ethernet.zip: (60.34 КБ) 31 скачивание

, версия ардуино иде 1.8.9

kivik · #7

У меня оказалось так что arduinoIDE одна в c:\Program Files\FLprog\ideV3
другая c:\Program Files\Arduino\
у каждой папка libraries
и еще одна папка с библиотеками в c:\Users\Kutkov\Documents\Arduino\libraries\
и как-то они мешали друг другу
Удалил ideV3 в FLProg , обновил до последней версии в c:\Program Files\Arduino\ и все заработало.
Всем спасибо особое SergeyShikal .