Не компилируется скетч при выборе платы Arduino Leonardo в настройках проекта и IDE. Если в IDE переключить на Uno скетч откомпилируется, но не загрузится.
Arduino: 1.6.9 (Windows 10), Плата:"Arduino Leonardo"
pr2:54: error: 'TCCR2A' was not declared in this scope
TCCR2A = 0x00;
^
pr2:55: error: 'TCCR2B' was not declared in this scope
TCCR2B = 0x07;
^
pr2:57: error: 'TCNT2' was not declared in this scope
TCNT2=100;
^
In file included from c:\Program Files (x86)\Flprog\ide\hardware\arduino\avr\cores\arduino/Arduino.h:30:0,
from C:\Users\renat\AppData\Local\Temp\build3a52ebb3f4b169fa694db257b248b96d.tmp\sketch\pr2.ino.cpp:1:
C:\Users\renat\AppData\Local\Temp\flprog\pr2\pr2.ino: In function 'void TIMER2_OVF_vect()':
C:\Users\renat\AppData\Local\Temp\flprog\pr2\pr2.ino:122:5: warning: 'TIMER2_OVF_vect' appears to be a misspelled signal handler [enabled by default]
ISR(TIMER2_OVF_vect)
^
pr2:123: error: 'TCNT2' was not declared in this scope
{ TCNT2=100;
^
C:\Users\renat\AppData\Local\Temp\flprog\pr2\pr2.ino: In function 'byte _modbusValidateRequest()':
C:\Users\renat\AppData\Local\Temp\flprog\pr2\pr2.ino:196:5: warning: unused variable 'intRegs' [-Wunused-variable]
int intRegs = 0;
^
C:\Users\renat\AppData\Local\Temp\flprog\pr2\pr2.ino:197:8: warning: unused variable 'byteRegs' [-Wunused-variable]
byte byteRegs;
^
C:\Users\renat\AppData\Local\Temp\flprog\pr2\pr2.ino: In function 'void _modbusSlaveSendTxBuffer()':
pr2:253: error: 'UCSR0A' was not declared in this scope
UCSR0A=UCSR0A |(1 << TXC0);
^
pr2:253: error: 'TXC0' was not declared in this scope
UCSR0A=UCSR0A |(1 << TXC0);
^
C:\Users\renat\AppData\Local\Temp\flprog\pr2\pr2.ino:247:6: warning: unused variable 'i' [-Wunused-variable]
byte i = 0;
^
C:\Users\renat\AppData\Local\Temp\flprog\pr2\pr2.ino: In function 'byte process_modbus_FC16()':
C:\Users\renat\AppData\Local\Temp\flprog\pr2\pr2.ino:308:6: warning: unused variable 'func' [-Wunused-variable]
byte func = _modbusSlaveBuffer[1];
^
exit status 1
'TCCR2A' was not declared in this scope
